RAD - Robotic & Automation Tooling 



OmniForce Deburring ToolHigh-Angle Collision Sensor2 Jaw Square Brute GrippersRAD Collision Sensor in Action
Spring-Loaded Compliance DevicePneumatic Collision Sensor3 Jaw Square Brute GrippersRAD OmniForce Deburring Tool in Action
Tool ChangerSpring Assist Collision SensorCollet GrippersRAD Grippers in Action
Compliance DeviceStainless Steel Collision SensorMiniature GrippersRAD Grippers in Action
OmniForce Deburring ToolSpring Loaded Collision SensorHarsh Environment GrippersRAD Collet Gripper in Action
previous next

Ultimatic™ Pneumatic High-Angle

Collision Sensors - Key Benefits

 
The Pneumatic High-Angle Ultimatic™ Collision Sensor maximizes uptime and, with a repeatability of 0.0005" (0.013mm), ensures that the final output still meets your exacting product quality standards - even after a crash.
 
The Pneumatic High-Angle Ultimatic™ Collision Sensor is RAD's patented mechanical collision sensor that:
  • Stops the robot* within 2 to 6ms of a collision to minimize costly damage to the robot and/or tooling. RAD's collision sensor provides protection even if the robot itself is not moving.
  • Offers a full 13° of angular compliance - 63% more than the original Ultimatic™ Pneumatic Collision Sensor model
  • Absorbs the crash energy without releasing the air pressure in the unit thus preventing tooling 'sag' and eliminating the effects of compressed air being released into the environment.
  • Automatically resets to within ± 0.0005" (0.013mm) in x, y, and z dimensions and to within ± 0.017º rotationally to maximize uptime and eliminate the need for human intervention.
  • Allows pneumatic adjustment so the user can easily change the amount of resistance the unit must encounter before signaling a collision.
  • Has a compliance adjustment feature that lets the user determine the amount of deflection allowed before a signal is sent to your robot's E-stop or controller.
Operating Principle
RAD's Pneumatic High-Angle Ultimatic™ Collision Sensor works by establishing the minimal points of contact required to restrain all degrees of freedom (movement) in normal operation. When a collision occurs, external forces upset this balance thereby allowing angular, rotational, or compressive compliance. This motion opens a normally closed switch and sends a signal to your robot's E-stop or controller.
 
Note: The Pneumatic High-Angle Ultimatic™ Collision Sensor can be used as a compliance (alignment) device by installing the unit without connecting the sensor switch. Please see the Compliance Devices section for more end-effector compliance options.
 

 


* can also be used on linear actuators, pick & place machines, and other automated equipment.
 

Get the latest updates from RAD - sign up for our newsletter >>