Information applies to models P-3600, P-3700, P-3800 and P-3900.
The following options are available to optimize RAD’s 3-Jaw Square Jaw Brute™ Parallel Gripper for your particular environment or application:
Sensors
Sensors can be positioned in any of the six standard dovetail slots and/or two standard barrel slots (for round sensors) in the wall of the gripper cylinder and are actuated by the magnetic piston. The sensors are:
Note: The 45º wire outlet allows close mounting.
Sensor Type | Prewired (9 ft) Part No | Quick Disconnect* Part No | Wire Leads | LED | Electrical Characteristics | Profile |
---|---|---|---|---|---|---|
Electronic |
4008 |
4009 |
3 |
Yes |
Sourcing PNP 6-24 VDC, 0.20 Amp Max Current, 0.5 Voltage Drop | 1/4″ Dovetail |
Electronic |
4010 |
4011 |
3 |
Yes |
Sinking NPN 6-24 VDC, 0.20 Amp Max Current, 0.5 Voltage Drop | 1/4″ Dovetail |
Reed |
4015 |
4016 |
2 |
Yes |
5-120 VDC/VAC, 0.03 Amp Max Current, 4 Watt Max, 2.0 Voltage Drop | 1/4″ Dovetail |
Reed |
3012 |
3013 |
3 |
Yes |
SPST, Normally Open, 5-120V AC/DC, 50/60 Hz, 0.005 Amp Min Current, 0.04 Amp Max Current, 2.5 Voltage Drop | Round |
Electronic |
3010 |
3011 |
3 |
Yes |
NPN, Normally Open, 6-30 VDC, 0.2 Amp Max Current, 1.5 Voltage Drop | Round |
Female Cordsets for Quick Disconnect
Length | 1 Meter | 2 Meters | 5 Meters |
---|---|---|---|
Part No |
4012 |
4013 |
4014 |
Pneumatic Air Ports Location
The location of the pneumatic air ports on RAD’s Square Jaw Brute™ Parallel Gripper can be rotated in 90º increments relative to the jaws if requested.
Viton Seals
Viton seals are available for when RAD’s 3-Jaw Square Jaw Brute™ Parallel Gripper is used in a hostile environment. Viton seals are designed for high temperature environments (up to 400ºF / 204ºC) and are resistant to many hostile fluids.
Adapter Plates
Plates used to connect RAD’s 3-Jaw Square Jaw Brute™ Parallel Gripper to the robot are available to help you easily install your new gripper.
Collision Sensors
RAD’s Collision Sensors stop the robot and protect your valuable tooling in the event of a collision.
Robotic Tool Changers
Automatic Robotic Tool Changers allow you to maximize the productivity of your robot by enabling it to perform multiple operations without human intervention.
Pneumatic grippers are used on robots, robotic arms, linear actuators, pick & place machines, and other automated equipment.
Employment Opportunities | Privacy Policy | Site Map
ISO-9001:2015
©2019 All Rights Reserved by RAD.